Ogura Design Advantages





CUSTOM MOLDED GEAR

The MIC assembly includes a custom-molded gear or timing pulley designed to your specifications. A three pronged dog bone output is also available.

ONE PIECE ASSEMBLY

The entire assembly is delivered pre-assembled, so it simply slides onto the shaft. There are no adjustments to make or gaps to set.

BI-DIRECTIONAL OPERATION

The clutch has the ability to drive clockwise or counterclockwise.

PERMANENT MAGNET RETURN

All standard units come with a permanent magnet armature return attached to the inside of the gear. This provides a fast and smooth disengagement of the armature when power is released to the clutch coil.

ZERO BACKLASH

If needed the armature can incorporate a one-piece spring that eliminates backlash.

LONG LIFE

Special bushings allow for millions of operating cycles for most applications.

D-CUT BORE

The bore of the clutch is made to fit a D-cut shaft to simplify installation and eliminate the need for set screws.

TWO CLUTCH POWER CONNECTION OPTIONS AVAILABLE

MIC clutches can come complete with a lead wire and a customer's specified terminal or the standard connector built into the clutch coil housing.